Cute figure of bunny infiltrator flying on balloon

Meet Special Bunny Agent 0.07. Some say he works for the government, others claim he's a member of the carrotele... we don't know for sure, but we do know one thing for certain: his job is all about carrots! He can infiltrate any garden to find every carrot in the world.

You can print head in multicolor, but for avoid waste of filament to purge I prefer pait eyes and nose. I paint my ground/base too.

The most challenging part to print is the balloon. Aim for slow speed, 1 or 2 perimeters, and 0% infill (to make the balloon as light as possible), and use at least a 20mm brim. Try to print without support for a smoother finish. However, if necessary, use user-defined tree supports provided in the .3mf file.

Use 50-60mm of filament as the rope.

The most challenging assembly step is attaching the ears to the head and the green stem to the carrot.

For the ears, try to slightly rotate them to find the right position.

For the stem, I suggest attaching the connector to the green part and then attaching it to the carrot only when you have already attached the assembled bunny to the carrot. This way, you can find the best position where the stem does not interfere with the arms.

Look at my other models of cute animals.