Kaiju #8 Cover Photo - HueForge

Kaiju #8 Cover Photo HueForge

Here are the settings I used to print it. This is a 8 color print with 8 swaps. The Chrominal's can probably be swapped with other Greys with less good blending, highly recommend those if you can get ahold of them. The Chrominal Sea Serpent Green (Forest) can be dropped for less blending and more blue hues in the aura.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 250x166.67mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 4mm and the Actual Depth is 2.5mm

Filaments Used:
PLA CookieCAD Candy Red Transmission Distance: 5
PLA PolyLite Black Transmission Distance: 0.3
PLA HueForge Dark Gray 2.3 Transmission Distance: 3
PLA HueForge Dark Gray 1.3 Transmission Distance: 8
PLA Bambu Metal Oxide Green Transmission Distance: 0.4
PLA PolyLite Polymaker Teal Transmission Distance: 0.5
PLA HueForge Forest 1.3 Transmission Distance: 8
PLA Zyltech Milky White Transmission Distance: 9.5
This print uses 8 unique filaments

Swap Instructions:
Start with Candy Red
At layer #21 (1.04mm) swap to Black
At layer #23 (1.12mm) swap to Dark Gray 2.3
At layer #33 (1.52mm) swap to Dark Gray 1.3
At layer #38 (1.72mm) swap to Oxide Green
At layer #39 (1.76mm) swap to Polymaker Teal
At layer #43 (1.92mm) swap to Forest 1.3
At layer #47 (2.08mm) swap to Polymaker Teal
At layer #48 (2.12mm) swap to Milky White for the rest.