Adapter for 2,5 kg spools

Adapter for the awesome

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

from Miklos Kiszely.

Which allows to use it with 2,5 kg spools with a height of 100 mm and a diameter 53 mm.

Filament: extrudr greentec pro (PETG, PLA etc. will work)

Print settings for the "Aufsatz_2.5kg_spule":

• orientation: see picture
• layer height: 0.2
• wall loops: 3
• Top/bottom layers: 5
• infill: 15% gyroid
• support: tree(manual)[ just support the very top of the diameter]

Print settings for the "Adapter_2.5kg_spule":

• orientation: see picture
• layer height: 0.2
• wall loops: 3
• Top/bottom layers: 5
• infill: 15% grid
• support: no

________________________________________________________________________________________________________________

Update:

Version 2 which should be more firm.

Print settings for the "Aufsatz_2.5kg_spule_V2":

• orientation: see picture
• layer height: 0.2
• wall generator: arachne
• wall loops: 3
• Top/bottom layers: 5
• infill: 15% gyroid
• support: tree(manual)[ just support the very top of the diameter]