Yoda May The 4 Be With You

Print at 100% infill (if scaled up) with a layer height of 0.16mm with a base layer of 0.2mm

This print uses 4 filaments

Swap Instructions:
Start with Charcoal Black
At layer #4 (0.68mm) swap to Dark green (light saber layer)
At layer #7 (1.16mm) swap to Lime Green
At layer #11 (1.8mm) swap to White for the rest.

I replaced the Dark Green light saber layer with glow in the dark filament seen in the grey slice photo for mine.

Happy Printing and May The 4th Be With You!!