For 50mm Tapes with 75mm inner diameter.
My changes:
- enlarged the roll for the tape to 75mm
- added a part to cut off the tape
- recess for M4 hex nut
Harware:
- 2x M4 x 15/20mm cylinderhead screw
- 2x M4 hex nut
- 2x M3 x 8mm countersunk screw
- 2x M3 hex nut
- 2x 5mm (wooden) screws depending on the mounting location
Settings:
- 0.20mm Standard
- Infill min. 20 %
- no support needed - parts orientation see below
- PETG
RestoreDoctor
