Fully 3d printed shoes
- TPU（85A is a good choice）
- The default size is European Standard 42.
- Please enlarge the size one to two according to the actual shoe size for better comfort and experience
- Please refer to the magnification ratio in Crocs Shoes - Full 3d printed in MakerVerse Designs for magnification ratio.
- If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed
35-83.33% 36-85.76%
37-88.10% 38-90.48%
39-92.86% 40-95.24%
41-97.62% 42-100%
43-102.38% 44-104.76%
45-107.14% 46-109.52%
47-111.90% 48-114.29%
If you like this model, please boots to me, I will bring you a better model.
Finally, I wish you a good printing experience,good luck
全3D打印拖鞋
- 最好使用85A TPU（更软）
- 模型默认尺寸为42码
- 请根据直接平常使用的鞋码放大1-2码，这样更舒服
- 放大倍率请参照MakerVerse Designs大佬的Crocs Shoes-Full 3d打印的放大率。
- 如果鞋子码数太大打印机放不下，请使用Bambu Studio旋转并使用其中的剪切功能，创建新的平台接触面
35-83.33% 36-85.76%
37-88.10% 38-90.48%
39-92.86% 40-95.24%
41-97.62% 42-100%
43-102.38% 44-104.76%
45-107.14% 46-109.52%
47-111.90% 48-114.29%
如果你喜欢我的模型，请给我投一张助力票感谢
KT
