May 5, 2024
Description
A detailed gothic moth pendant created for the 0.2mm nozzle challenge on MakerWorld. It combines ornaments and gothic design elements shaped like a moth. A beautiful gloomy accessory.
Testprinter: A1 Mini with a 0.2mm nozzle. A 0.4mm nozzle is not recommended and not tested for this small and detailed design.
Filament for the Testprint: BambuLab BlueGrey PLA
This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission. Contact me via E-Mail if you are interested in selling 3D-printed Neopyx3D designs.
If you like my work you can buy me a coffee and support my work:
https://buymeacoffee.com/neopyx3d
Recommended Main Settings:
Layer height: 0.06 (0.2mm nozzle)
Infill: 15% Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: Outer Brim only with 0.3 or 0.1mm space
Printing Temperature and Cooling: depends on filament
License:
Standard Digital File License
1,159
1,182
Kreativ-Vampir
