May 7, 2024
Description
Umbreon is a fan favourite of this house, so here is one of my favourite ones that came out.
They come out fairly thick so it has a nice feel to it.
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Black Transmission Distance: 0.3
BambuLab Basic Red Transmission Distance: 4
Gray Transmission Distance: 3
White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Gray
At layer #19 (1.6mm) swap to White for the rest.
Thanks for checking this out and I hope you enjoy it!
License:
BY-NC
moezium
