May 11, 2024
Description
This is a magnetic fan duct for Bambulab P1S (but should work also for other models).
The exhaust duct can be used to connect a 10cm (4inch) hose directly to the printer and extract fumes.
The connection is grated with 10mm x 2mm magnets (8) directly to the metallic back panel.
I designed an L-shaped border to be used for gasket if needed (check photoes).
I hope this will be useful for your setup.
Please leave comments.
Bye
License:
BY-NC-SA
10,938
Paolo Valli
