Articulated Shark

The original Articulated Shark is finally on MakerWorld!

 

XY compensations have been tuned because Bambulab printers are way too precise 😂 (and this model was designed back in 2019). Note that the upper teeth rely on the bottom ones to be printed, that's why a well-calibrated gap is so important. If it fails or it is too hard to open the jaw feel free to adjust the XY compensations yourself. I've provided a head so you can test the settings without wasting too much material.

 

4 Versions available:

• Shark A: Original design, movable jaw
• Shark B: Friendly face, movable jaw
• Shark C: Original design, NON-movable jaw
• Shark D: Friendly face, NON-movable jaw

After printing, the tail and the jaw should get free with a little force (a small knife may help you for the teeth):
https://youtu.be/14z1ll9yMmU

Then just enjoy it, even in the water!!
https://youtu.be/E1W-RyH8bGA
https://youtu.be/aV-XhMr7Edc

 

MembershipLooking for a Commercial License? Check here!

Check here for further Commercial License info