HSW Ratchet Mounts for 1/2, 3/8 and 1/4 Inch drive

HSW Ratchet Mounts for 1/2, 3/8 and 1/4 Inch drive

This design comes with three models designed to fit a 1/2, 3/8 and1/4 Ratchet. The mounts fit directly into the HSW system without any adapters. Each mount has notch so the racchet will lock in place and stay secure. To release the ratchet press the button on the end of the ratchet, the same as releasing a socket.

Print Settings:

These mounts can be printed in either PLA or PETG. No supports are needed.

• Material: PLA/PETG
• Layer height: 0.2mm
• Perimeters/Wall Loops: 4
• Sparse Infill Density: 20%