May 17, 2024
Description
UPDATE: I removed exclusivety from the model. You can now create remixes and enhance the model to your liking.
2 plate print
Â
Â
Â
Â
A simple 3 plate print to assemble a bracket and drawer to magnetically mount to a Secretlab Magnus Pro Metal Desk.
You'll need 14 round 20x3mm magnets like on the pictures below:
Â
Â
Print Front and Back of the bracket and then slide them into each other. Make sure the magnet holes face in the same direction.
BTW: The rails are a slide-n-lock system. So push the bracket parts into each other so they align seamlessly. Due to the lock-system you'll need a bit more force (not too much) before completely sliding in.
Depending on the height and load of your drawer you'll need 8 - 12 magnets which you need to press into the magnet bores. They will fit super thight and shouldn't need any additional adhesive, but you can use some if you want.
Â
The big downside of the Magnus Pro desk is, that there are only 2 thin magnetic stripes on the bottom of the desk. So I had to come up with this multi-part solution so the bracket can attach on the front and back.Â
Here's a picture of how it's attached:
Â
To prevent the drawer from falling out, I added a small protrusion to the model. It's not stopping you from pulling it out with force, but you'll feel when it's time to stop ;-)
See this detailed picture of the lock on the bracket:
Â
Since the drawer is especially crafted for the Magnus Pro, there's not much to adapt except for the `drawer_height_inner` which is defined as a multiple of the gridfinity height-unit (7mm).
The default is set to 11 gridfinity height units.
You can just adapt the f3d-Archive parameter and it should scale accordingly.
Join the
If you appreciate this model and wanna buy me coffee, you can do so here: https://ko-fi.com/kellervater
Or simply scan this QR-Code:
License:
BY-NC-SA
KellerLab
