卡通小狗 柴犬 坐下 | Cartoon small dog Shiba Inu

这是抽空做的一个小柴犬的坐立姿态模型，想法就是做一只看着就很开心的小柴犬，在这充满压力的每一天里看到小狗会让你紧绷的心情稍微放松些。

做到后面想着能不能让它站立起来呢，可能会很好玩。于是我修改了设计，成功让它站立了起来也添加了一个狗窝。但是脚掌部分的支撑面机太小，要让它成功站立起来需要一点耐心，坐着反而会更容易点，哈哈。

我调整了设计，在脚踝后面和底座的底面添加了凹槽，可以安装小磁铁，通过胶水粘起来增加稳定性。我在自己这里测试了效果还不错，我使用的磁铁尺寸是： 19*4.5*2.5mm 长条形磁铁；直径2.5~3mm厚度2mm左右 圆形磁铁

脸部侧面偏下应该悬垂面太大，有些堆积，我不确定是否更改参数或者能修改模型的伙伴能自己调整一下，效果应该会更改好些。

另外还上传了一个四角站立姿态的小狗，可以去看看，感谢您的喜欢！^ ^
-----------
This is a sitting/standing posture model of a small Shiba Inu that I made in my spare time. The idea is to create a small Shiba Inu that looks very happy. Seeing a little dog in this pressure-filled day will help relax your tense mood a little.

Later on, I thought about if I could make it stand up, which might be fun. So I modified the design, successfully made it stand up, and also added a doghouse. However, the support surface of the foot part is too small. It requires a bit of patience to make it stand up successfully, but sitting down might be easier, haha.

I adjusted the design and added grooves at the back of the ankles and the bottom of the base to install small magnets, increasing stability when glued together. I tested the effect myself and it worked well. The magnet sizes I used are: 194.52.5mm (rectangular) and 2.5~3mm in diameter, approximately 2mm in thickness (circular).

The hanging surface of the lower face on the side profile should be reduced, as there is some accumulation. I am not sure whether changing parameters or manually adjusting the model can fix it, but the effect should be improved.

I have also uploaded a model of a small dog in a four corner standing posture. You can take a look at it. Thank you for your understanding and liking it! ^_^