Bambu Lab AMS/AMS 2 Pro - Dual/Quad/Multi Shelf

BAMBU LAB  AMS/AMS2 Pro - DUAL AND QUAD SHELF

Dual and Quad AMS Shelf for Bambu Lab AMS.

Can also be extended to 6x, 8x etc. in case of multiple printers.

It provides enough space so both AMS lids can be openen without any issues.

AMS 2 Pro:

Today my first AMS2Pro arrived and I can finally confirm that it also fits in the shelf!

Dual Shelf Parts:

1. Platform (Needs to be glued with a strong glue - Print Twice!)
2. Bottom Feet (individual for each side)
3. Middle Support - Bottom Sockets (Print Twice!)
4. Middle Support - Main Part (Single- or Multi-Color - Print Twice!)
5. Middle Support - Top Sockets (Print Twice!)
6. Top Shelf Holders (individual for each side)
7. Top Shelf Top Piece (Print Twice)

Quad Shelf Parts:

1. Platform (Needs to be glued with a strong glue - Print Four Times!)
2. Bottom Feet (individual for each side)
3. Middle Support - Bottom Sockets (Print Twice!)
4. Middle Support - Main Part (Single- or Multi-Color - Print Twice!)
5. Middle Support - Top Sockets (Print Twice!)
6. Top Shelf Holders (individual for each side)
7. Top Shelf Top Piece (Print Twice)
8. Quad Extension Foot + Top Shelf Holder PT1 + PT2
9. Quad Extension Middle Support

Assesmbly Notes:

• Glue only mandatory for the Platform/Shelf Parts
• No glue required for other parts, but… well… glue always helps ;-)
• All parts fit together without having to use excessive force! Only the support parts might need some loving bumps ;)
• Bottom feet and top shelf holders are individual parts for each side and the platform will fit on the feet and holders only in one orientation!
• The AMS Shelf is self-supporting. It wobbles a little bit but not too much. As it's just intended to stand there and hold the AMSs, this is fine for me.

You can for sure add as many shelf parts as you like, no matter if it is in height or width. This project just represents my “standard” configurations.