Folding Propeller for Flipsky 7070 E-Foil Motor

Boost MeI would be very happy if you boost this or any of my other models that you like. This will accelerate me in making more things for the community. Thank you!

Use the provided print profile and print the blades horizontally. I used Super PLA+ which is less brittle and a little bit dampening to avoid cracking,but harder to print unfortunately.

 

You need 2 of M4x50mm screws and nuts to fix the blades to the hub adapter.

 

You can also use this cone adapter for stream lined water flow https://makerworld.com/en/models/474852#profileId-385456

 

PRINT PROFILES:

 

• use the 180mm print profile to print the blade adapter and optionally the 180mm blades
• use 170/180mm blade print profiles to print other blade lengths