Harley Quinn 5" x 7" five-color print

Use my print profile for best results, I cannot guarantee print profiles by others.

Here's a 5x7" print for framing of Harley Quinn. It's very thin so you'll want to mount it (or add some thickness). It's printed with the following settings as a HueForge print using 5 colors on 2 AMS'es. You can also manually create stops and change filaments if you don't have the AMS.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Use 100% Fill (Rectilinear)

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Set Swap Stops at:
Start with Charcoal
At layer #8 (0.44mm) swap to Marine Blue
At layer #16 (0.76mm) swap to Scarlet Red
At layer #30 (1.32mm) swap to Lemon Yellow
At layer #36 (1.56mm) swap to Ivory White for the rest