May 29, 2024
Description
An adorable cat bookmark that I made using Hueforge. Turned out really well!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.8x152.21mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used: (* = Owned)
#000000 * PLA Sunlu Black Transmission Distance: 1.7
#ff6a13 * PLA BambuLab Basic Orange Transmission Distance: 5
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#ffffff * PLA Sunlu White Transmission Distance: 9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Orange
At layer #11 (0.96mm) swap to Blue
At layer #14 (1.2mm) swap to Orange
At layer #20 (1.68mm) swap to White for the rest.
License:
Standard Digital File License
CraftHappy
