HINT: Having an issue with letters sticking to build plate?
If using a smooth plate (recomended for higher quality text) still set slicer to textured for that extra squish.
Clean the build plate.
Use a very light amount of glue stick or Nano Polymer
Be sure you are using my profile or slow down the first layer even more (should not be required)
QUALITY HINT: Smooth build plates will resolve better quality text and other fine detailed first layers. PRO TIP: set slicer to textured (even with smooth plates) for that extra squish.
AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer & Hub.
AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)
AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)
Buffer Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and inside the AMS during PTFE repairs.
2x Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.
If you want to up your cool game, use 6x2mm Magnets. Pay close attention to the magnets polarity (all should face same direction/polarity). They're designed to fit magnets snugly, but you might need a little glue for some of them.
K2_Kevin
