Mangekyo Sharingan - Amaterasu ( Hueforge )

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 239.99x134.93mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #13 (1.12mm) swap to Ash Gray
At layer #20 (1.68mm) swap to Jade White for the rest.
!!USE THE PROVIDED PROFILE FOR BEST RESULTS!!