Milwaukee Packout Hex Bit Insert 218 or 120 Bits

Custom made drill bit insert for the small Milkwaukee Packout Shockwave Case!

Run both sides at the same time to hold 218 bits in one case! Nothing you can buy or print has this much capacity in such a small space. They are offset by ½ unit so no rubbing - my largest Phillips didn't hit my largest Torx. The square holes are 6.95mm x 6.95mm. I tested 6.9mm and 7.0mm before settling on this fitment. The bottom holds 120 bits the top holds 98 bits. Slice off one row or column if you need a test print.

218 Bits = Print top and bottom
120 Bits = Print bottom only

Form over Function: This may not be the best way to store 218 bits (sometimes inner bits can be hard to access) but it definitely is the cleanest looking way!

There's two versions of this case this is for the wider version. If you have the skinnier version message me lets figure out the sizing and I'll release it!