"Sakura Tree" - Bookmarks set

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

MembershipC3D Commercial Membership - Authorized Merchant

 

A beautiful set of bookmars with a different pictures of a Sakura Tree

The full set is to be printer together. It's designed in such a way which makes this possible with color changes by layer.

 

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

 

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
For folks without AMS:

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA KINGROON Red Transmission Distance: 4
PLA KINGROON PINK Transmission Distance: 6.5
PLA Jayo Matte White Transmission Distance: 3.5
Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #11 (0.96mm) swap to PINK
    At layer #14 (1.2mm) swap to White for the rest.

Boost MeIf you enjoy my work and want to support me boost this model in show of support! Every single boost puts a smile on my face and is greatly appreciated! 🤜🤛

If you like my work, drop me a follow!🤜🤛