A1/A1mini挤出电机风扇外壳 A1/A1mini Motor Cooling FanShell

只是一个用于A1系列的挤出电机散热器外壳

分成两部分：外罩和固定卡扣

使用4010的24V风扇（本来打算用3010风扇的，可是买上后感觉可能会太小，风量不够）

连接一个KSD9700温控开关贴在电机上，控制风扇启停，从AMS的4P接口取电

注意：经过测试，有格栅的外罩比没格栅的外罩显著增加风扇噪音，且噪音更加尖锐

其他五金件：

3*3*4.2镶嵌螺母 * 4

M3*16平头螺丝 * 4

Just a heat sink housing for the A1 series extrusion motor

Divided into two parts: outer cover and fixed buckle

Using a 24V fan from 4010 (I originally planned to use a 3010 fan, but after buying it, I felt it might be too small and the air volume might not be enough)

Connect a KSD9700 temperature control switch to the motor, control the start and stop of the fan, and take power from the 4P interface of AMS

Attention: After testing, it was found that the outer cover with a grille significantly increases fan noise compared to the outer cover without a grille, and the noise is sharper

Other hardware components:

3 * 3 * 4.2 Inlaid Nut * 4

M3 * 16 flat head screw * 4

（machine translation）