Deadpool painting Hueforge

Project: Deadpool painting 1 Hueforge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
If changing size . . . only change X and Y, not Z.

I created a stand that will work great as well:
https://makerworld.com/en/models/1025425#profileId-1007499

The Model is 200x291.24mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #24 (2mm) swap to Black
At layer #30 (2.48mm) swap to Gray
At layer #36 (2.96mm) swap to White for the rest.