自媒体适用|手机竖立支架 Vertical Phone Stand

数码博主们经常拍摄的手机竖立在桌面上的画面

所以制作了一个可以实现这个效果的同时，尽可能的缩小体积，防止其他角度穿帮的竖立支架

一共制作了两个版本

1.轻量版，一体打印适合批量生产，大量展示镜头适用此种，分为矮版和高版

2.三角度可调版

70，80，90度三个角度可更换

提供正常底座和加大底座

使用前的处理：塑料本身没有摩擦力，为了拍摄时不穿帮所以不能用夹具形式固定手机

1.使用双面胶、纳米胶贴住红色接触板（放心一般的胶不会残留在手机背部）

2.给底座防滑，可以贴硅胶防滑脚贴或是让胶水凝固起到防滑效果。若需要支撑的设备过重可以改成双面胶粘住桌面和支架底座

正常情况可以重复使用

建议改为100%填充为支架加重（但塑料本身质量就很轻，所以需要胶来固定）

开源文件为f3d格式

Digital content creators often capture shots of their phones standing vertically on a desk. To achieve this effect while minimizing the stand's visibility from other angles, I have designed a compact vertical phone stand.

### Two Versions

1. **Lightweight Version**:
- Suitable for mass production and extensive shot displays.
- Available in short and tall versions.
- Printed as a single piece.

2. **Adjustable Three-Angle Version**:
- Offers three replaceable angles: 70, 80, and 90 degrees.
- Comes with a standard base and an enlarged base option.

### Pre-use Preparation

Plastic itself lacks friction, so to avoid the phone slipping during filming, it cannot be clamped. Here’s how to prepare the stand for use:

1. **Secure the Contact Plate**:
- Use double-sided tape or nano adhesive to secure the red contact plate. (Don't worry, regular adhesive won't leave residue on the back of your phone.)

2. **Add Anti-Slip Features to the Base**:
- Attach silicone anti-slip pads or allow glue to set for an anti-slip effect.
- For heavier devices, you can use double-sided tape to stick the base to the table.

Under normal conditions, the stand can be reused multiple times.

### Additional Recommendations

- For added stability, consider printing the stand with 100% infill to increase weight (plastic itself is light, so adhesive is needed for fixation).

### Open Source

The design files are available in f3d format for further customization and improvement.