This unique purge chute solution screws right onto your P1- or X1-Series Bambu Lab printer and allows you to attach plastic bags to catch filament waste!
Steps:
- Wrap a plastic bag around the mouth of the Poop Chute Adapter and use a zip tie to fasten it securely.
- Unscrew the two small M3 screws above and below the purge chute.
- Align the Poop Chute Adapter and screw it on.
- Note: you may need to use slightly longer M3 screws than those you just removed. I used screws provided by Bambu Lab in the accessories box shipped with my printer!
- Note: The hole on the front side of the Poop Chute Adapter is there so that you can stick your hex key through it to tighten the bottom screw
- Now you're ready to print without filament poops landing everywhere!
Boost MeThank you for your support!
Pulsar Designs
