"Galactic Wonders" - Bookmarks set

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

MembershipC3D Commercial Membership - Authorized Merchant

 

A beautiful set of bookmars with a different pictures in a galactic theme.

The full set is to be printer together. It's designed in such a way which makes this possible with color changes at layers.

Filaments Used: PLA EryOne Galaxy Black Transmission Distance: 0.1

PLA Jayo Meta Gray Transmission Distance: 3.5

PLA+ Jayo Silk Bronze Transmission Distance: 1.1

PLA+ Jayo Silk Gold Transmission Distance: 2

PLA KINGROON WHITE Transmission Distance: 6.9
 

Swap Instructions:
Start with Galaxy Black / Black
At layer #7 (0.64mm) swap to Dark Gray
At layer #9 (0.8mm) swap to Bronze
At layer #12 (1.04mm) swap to Gold
At layer #13 (1.12mm) swap to WHITE for the rest.

If you like my work, drop me a follow!🤜🤛

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!

If you like my work, drop me a follow!🤜🤛