A1 mini AMS lite干燥封箱drying box2.0

这是为A1mini设计的AMS lite干燥箱，保留了原有的回转功能。安装过程中不需要任何螺丝，只需要一些胶水和软磁条，并且这个解决方案可以用于商业用途。商业使用需要署名作者及来源。

建议与AMS电机顶置支架配套使用。

您可以使用任意电机顶置支架或购买我设计的支架图纸，非常便宜且不需要额外螺丝。

购买连接:

https://mall.bilibili.com/neul-next/index.html?page=mall-up_itemDetail&noTitleBar=1&itemsId=1106189077&from=items_share&msource=items_share

This is a drying box for the AMS lite designed for the A1 mini, retaining the original rewinding function. The installation process does not require any screws, only some glue and soft magnetic, and this solution is allowed for commercial use.Commercial use requires authorship and source.

It is recommended to use with AMS motor overhead bracket.

You can use any motor overhead bracket or purchase the bracket drawings I designed.Very cheap and no extra screws are needed.

Purchase connection:

https://cults3d.com/zh/3d-m%C3%B3x%C3%ADng/g%C5%8Dngj%C3%B9/a1mini-ams-z-bambu-lab-a1mini-ams-z-axis-bracket

材料/Materials：PETG

外部尺寸/outside size：440*240*250mm

内部尺寸/inside size：430*220*210mm

最大兼容料盘尺寸/Maximum spool size：D（直径/diameter）<200mm

其他配件&Other parts：

亚克力/acrylic（220*220*5 mm）X2

亚克力/acrylic（220*430*5 mm）X4

橡胶软磁条/Rubber magnet（10*1.5 mm）X 6 米/meters

橡胶脚垫/Rubber foot mat (20*8*3 mm）X7 

铁氟龙管道/PTFE pipe(d=4mm）4米/meters

安装注意事项/Installation precautions：

1、为了保障箱体良好的密封状态，可在结构件和亚克力缝隙中使用玻璃胶/结构胶进行密封。

      in order to ensure a good sealing state of the box, glass glue/structural glue can be used in the structural parts and acrylic gaps to seal.

2、因耗材收缩系数不同，在部分承重结构件连接不够紧密时请使用胶水粘接

      due to the different contraction coefficient of consumables, please use glue when the connection of some structural parts is not tight enough

安装说明/Installation instructions: 

成品展示/Finished display：

YouTube links：