Bambu Lab Air Flow Upgrade

Hey there! Check out my website to see the latest products I've designed—now available for you! 
Don't miss out, hit the link and explore what's new!
My Shop: https://buymeacoffee.com/cc3dprojects/extras

My Website: https://www.cc3dprojects.com/

My YT Channel: https://www.youtube.com/@CC3DProjects

Ciao everyone,

For those like me who mount the AMS above the printer, I've designed this frame to elevate the glass and allow me to create openings to vent the hot air from the print chamber. I've also added flaps for each ventilation hole so that you can either open them fully or partially, depending on your needs.

The pieces have been designed to fit together, and it should not be necessary to use glue.

The print settings are as follows:

Material: PETG

Layer Height 0,2 mm
3 Walls - 3 Bottoms - 3 Tops
Infill 15% - Grid

Support everywhere

I'm also including a file for positioning the pieces on your Bambu printer's build plate. Everything can be printed on a single plate.

I'd also like to suggest a couple of other upgrades that I've created.

Please check out these two models:

A frame to elevate the AMS and use its underside to attach an LED strip for improved print bed lighting. 
https://www.printables.com/it/model/319336-bambu-lab-ams-stand

A Purge Bucket to be applied to the back of the printer, with magnets or adhesive, for those like me who don't have enough space on their table or shelf.
https://www.printables.com/it/model/307031-bambu-lab-x1-purge-bucket

A solution to muffle the exhaust fan noise of Bambu Lab X1.
https://www.printables.com/it/model/384533-bambu-x1-exhaust-muffler-or-fan-silencer

As always, I'm here to help if you need assistance.
In the meantime, happy printing to all of us!

Last thing, guys, this is the shelving unit dedicated to my Bambu X1.

Ciao