eSun PLA+ Temperature Tower (210 - 230 °C)

Boost MeIf you liked the model, you can boost me for free :)
It helps me to publish more models in the future.
Thanks!

As many have asked for it, here is the PLA+ Temperature Tower (e.g. eSun).

 

PLA+ Test for 210 - 230 °C

------
Info: If you have the problem that only eg. 220 degrees are shown for the whole tower after slicing:
Please click on the drop-down arrow next to the "Download or Print" button here on the website and select "Download STL". Download the file there.
It seems that the "Open in Bambu Studio" option is blocking the gcode right now for some people.

------

 

Check out my other temperature towers:

Normal PLA: https://makerworld.com/en/models/506049#profileId-421778

PETG: https://makerworld.com/en/models/512668#profileId-428764

 

------

 

The attached .3mf file contains the corresponding gcode for the Heat-Temperature-Tower.
The print takes about 2 hours (tested on my BambuLab A1).

Instructions:
0. Use a Mac / PC. The mobile app does not support custom gcode.

1. Click “Open in Bambu Studio” or download the .3mf file via the drop-down arrow text to “Download or Print” and select “Download STL”.
2. (Open the .3mf file with Bambu Studio) Click on "slice plate" and then on "print plate".
3. After the print is finished, you can evaluate the temperature tower in terms of stringing, accuracy (e.g. overhangs, cones etc.).
4. It also makes sense to evaluate the temperature tower destructively. For example, you can use pliers to break off individual layers of each temperature range and find the optimum layer strength for your PETG.

 

------

My temperature tower tests the (eSun) PLA+ with linear overhang (35° & 45°), radial overhang (4 mm & 6 mm radius), bridging, stringing, cones / circles and simulates "drill holes" and much more.

NutellaPizza