HelloKitty 2 冰箱贴refrigerator magnet

冰箱贴高度约10cm。

The height of the refrigerator sticker is about 10cm.

我设计的时候预留了零件之间的间隙，所以拼装很容易，不过需要准备好胶水。

When I designed, I reserved gaps between the parts, so assembly is easy, but I need to prepare glue.

我预留的磁铁安装位是10.2mm的，所以只能贴直径10mm以内的磁铁。

The magnet installation position I reserved is 10.2mm, so only magnets with a diameter of less than 10mm can be attached.

我预留了多个磁铁安装位，是为了应对不同的冰箱表面磁性以安装多个磁铁，正常一个10mm的磁铁就够了。

I have reserved multiple magnet installation positions to accommodate different surface magnetic properties of the refrigerator. Normally, a 10mm magnet is sufficient.

如果冰箱面是平的，可以使用1mm厚的磁铁，如果冰箱表面有弧度建议用1.5mm的磁铁。

If the refrigerator surface is flat, a 1mm thick magnet can be used. If the refrigerator surface has an arc, it is recommended to use a 1.5mm magnet.

买下图这样的带3M背胶的软磁贴效果更好。

Buying a soft magnetic sticker with 3M backing adhesive like the one shown in the picture will have a better effect.

如果您对模型满意，请给个免费的点赞和收藏，非常感谢！
If you are satisfied with the model, please give a free like and collect, thank you very much!