Water Pipe Clamp

Are you installing a new sink and you don't like the flexible pipes free, and would like to position them neatly in the compartment under the tap?

My Hose are standard DN8 for high pressure water with external diameter of 12mm ( 0,472441 inches )

Print these fixing clamps.
Two 5mm wall plugs, and everything is resolved in a short time and everything remains nice and tidy.
In the print files, you will find the clamp for a single tube, or the version that can receive two tubes.
I have provided multiple print files to allow you to select and print on the fly the type of clamp you need and also the type of materials.
There are no particular requirements, and PLA is also optimal and guarantees an excellent retention structure (for those who have open printers...don't worry...just print PLA or better yet PETG).
For those who own a P1S or X1C, my advice is to go for ABS or ASA, mainly because domestic hot water will probably pass inside one of your pipes (max 55°C). However below the softening temperature of PLA, but why limit ourselves?
In the printing profiles for ABS/ASA, I also inserted an outer brim to avoid the hassle of possible warps during the printing phase (absolutely not necessary in the profiles for PLA).