Cylinder Maze Ring Holder

This ring holder provides an extra layer of security to keep your rings safe from only the least determined thieves. Simply slide your ring over the stem and then navigate the locking ring through the maze to the bottom to secure it in place. To retrieve your ring you must remove the locking ring by solving the maze again.

Compatible with rings that have an inner diameter between 12-25mm.
Overall height: 44mm
Base Diameter: 30mm

This print contains 30° overhangs so I recommend printing with a layer height of 0.12mm or lower. The “Ring Maze - Sliced.3mf” file contains PrusaSlicer settings to modify the layer height to 0.1mm for layers with overhangs to save time and prints the two pieces sequentially to prevent stringing. The locking ring and stem have 0.2mm of clearance designed in. You may need to remove printing defects with a blade or abrasive to allow smooth operation.