Cute Penguin

Tips for printing:

• Supports: Yes = CutePenguin_3 / No = CutePenguin_1_2
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: Arachne !!!
• Detect thin walls: -
• Brim: Yes

Colors and filament I used (3 Color Version):

• PLA / White - for the face and eyes
• PLA / Black - for the body and eyes
• PLA / Orange - for the feet and beak

Or decide for yourself which colors and how many you want to use!

 

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

 

Here is another important tip for printing in multicolor: All penguins (1 + 2 + 3) must be printed in Arachne! Not in Classic! (Wall generator). So that the lines are printed in the middle, equal and look better! (See picture below!)

Boost MeIf you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!