Had an idea for a simple poop chute using toilet roll tubes.
Connector - Fixing was inspired by:
https://makerworld.com/en/models/171989#profileId-211762
Magnets used were: 5mm x 2mm
Toilet Roll Tube Diameter is: 40mm
Feel free to remix the Connector - Fixing part to adjust magnet fitting size.
Note: it is recommended to use this poop chute with an AMS as it has been raised that it can clash with the default spool holder positioning.
Updates:
- Added a alternative Connector-Fixing STL to support 8mm x 2mm Magnet Sizes. (This can be found in the “download STL/CAD Files” section when selected in the dropdown)
- Added a 75mm Length Couple Connector to stl downloads section. (Thanks @Simbach)
- Added much requested 45Degree Y Coupler for Multi printer setups. (This can be found in the “download STL/CAD Files” section when selected in the dropdown)
- Updated .3mf file with new parts. Supports still enabled by default as without can lead to adhesion issues between couplers and print bed.
Boost MeNo idea how boosting works but if you like the model feel free to boost.
SuperPrintBro
