Modular Pegboard Filament Spool Holder 模块化洞洞板耗材架

Introduction 作品介绍

""

As titled, this is a sturdy filament spool holder that can be mounted to your pegboard, so that those spools are no longer piled up on your worktable (｡•̀ᴗ-)✧

如题，这是个可以安装在洞洞板上的稳定耗材架，帮你整理已经堆在工作台上很久的耗材卷儿 (｡•̀ᴗ-)✧

Assembly 安装指南

Choose from either the long beams or the short ones. Insert the pair of beams into the socket on the arms until you hear the click and it will be locked in place. Please remember to insert them from the flat side of the arm

The holder still works even if a clip of the beam‘s insert accidentally breaks during the installation

Check the next section to learn the differences between the 2 types of beams

从长梁和短梁中选择一种，从悬臂平的一面插入圆形接口，听到啪的一声并确认横梁已经锁定

安装过程中意外损坏了横梁的咬合也不要紧

看下一节了解两种横梁的区别

Mounting Modes 安装模式

Mode 1 模式1

""

1 spool on 1 holder with long beams, this is compatible with the standard 1kg or smaller spool

用长梁，每个架上一个卷，兼容标准1公斤或者更小的耗材

Mode 2 模式2

""

1 spool on 2 holders with short beams, this is compatible with the standard 1kg or smaller spool. It also provides stronger strength when using PLA to print the arms

用短梁，每两个架上一个卷，兼容标准1公斤或者更小的耗材。如果使用PLA打印悬臂，这个能提供最大强度

Mode 3 模式3

""

2 spools on 3 holders with short beams, this is compatible with the standard 1kg or larger spool. From now on, each extra spool needs only 1 extra holder. This arranges the spool at a closer distance

用短梁，每三个架上两个卷，兼容标准1公斤或者更大的耗材。从此增加一个新的卷只需要额外一个架。这种模式下卷之间的间距更小，密度更大

Printing Guide 打印指引

Print without support! PLA works well (I use PLA + mounting mode 1), but ABS/PC is more worry-free

Please cool down the print before mounting it to the pegboard, lubricant is also recommended

可以无支撑打印！可以使用PLA（本人使用PLA + 安装模式1），但推荐ABS/PC，更保险

装上洞洞板前请先冷却，推荐使用润滑剂