"Starry Night Dreams" - Bookmarks Set

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

MembershipC3D Commercial Membership - Authorized Merchant

 

MAKE SURE TO ALSO CHECK OUT V2: Starry Night Dreams (2)

The "Starry Night Dreams" bookmark set features enchanting, Van Gogh-inspired designs that capture the swirling, star-lit beauty of a nocturnal landscape. Perfect for dreamers and book lovers alike

 

For best results use 0.2 nozzle if possible.
The design allows for printing simultaneously with simple color changes at layer, which saves a lot of filament!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4
PLA KINGROON Blue Transmission Distance: 4
PLA+ Jayo Mint Green Transmission Distance: 4.5
PLA+ Jayo Gold Transmission Distance: 2
PLA KINGROON WHITE Transmission Distance: 6.9
Color Pallete:

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Mint Green
At layer #13 (1.12mm) swap to Gold
At layer #16 (1.36mm) swap to WHITE for the rest.
 

Boost MeIf you enjoy my work and want to support me boost this model in show of support! Every single boost puts a smile on my face and is greatly appreciated! 🤜🤛

 

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!

Drop me a follow!🤜🤛