Wall Plug for Cable Clip nails/Tacks

Wall plug Clip plug for external walls. If your house mortar bends the small nails/pins on cable clips, just drill a 5mm hole in the mortar and tap one of these in.

I tried printing with and without brims, both worked but if many copies are going on the bed then maybe you need a brim.

Printed fine in PLA, there's no grooves on these but they should easily be enough to grip a panel pin type nail in the mortar as there is no massive load on these to secure a cable clip.

Use a 5mm masonry drill bit with a bit of tape at 20mm for a depth stop.