1130 CIWS MagSafe Charger Stand 1130近防炮 MagSafe充电座

H/PJ-11型11管30毫米舰炮（简称：1130近防炮），是中国研制的一款11管30毫米转管式速射炮近程防御武器系统。针对来袭的反舰导弹、飞机和其它武器，H/PJ-11型11管30毫米舰炮迅速瞄准并用30毫米口径炮弹将靠近的飞行器击落，构成了航母等舰艇最后一道防线。H/PJ-11型11管30毫米舰炮已经装备辽宁号航空母舰上作为近程防御系统，也装备中国海军各种驱逐舰、护卫舰上。

H/PJ-11 Type 11 Barrel 30mm Naval Gun (abbreviated as 1130 Close-In Weapon System) is a Chinese developed 11 barrel 30mm rotary rapid fire gun short-range defense weapon system. In response to the incoming anti-ship missiles, aircraft, and other weapons, the 1130 CIWS quickly aim and shoot down approaching aircraft with 30mm caliber shells, forming the last line of defense for aircraft carriers and other ships. The 1130 CIWS has been equipped on the Liaoning Aircraft carrier as a close range defense system, as well as on various Chinese Navy destroyers and frigates.

这款1130近防炮的模型支持二轴旋转（旋转有段落感），炮管也可以旋转。为了适配磁吸充电器，模型比例略有调整。模型相对普通磁吸充电座略大，请不要介意过多占用你的桌面空间……装配MagSafe的模块可以拆卸和替换，但是目前只支持MagSafe，未来会根据各位需要跟进适配别家的磁吸充电座产品（请在评论区留言补充）。

This 1130 Close-In Weapon System supports two axis rotation (with paragraph like rotation), and the gun barrel can also rotate. In order to adapt to the magnetic charger, the model scale has been slightly adjusted. The model is slightly larger than a regular magnetic charging dock, please do not mind occupying too much of your desktop space... The module equipped with MagSafe can be disassembled and replaced, but currently only supports MagSafe. In the future, I will follow up and adapt to other magnetic charging dock products according to your needs (please leave a comment in the comments section to supplement).

整体打印和装配需要接近800g的白色耗材、300g黑色耗材，拓竹官方商店的AA004号螺丝包（20颗BT2.6x8），自带贴纸的MagSafe引磁环（某宝大概3块钱一个）。

The overall printing and assembly require nearly 800g of white consumables, 300g of black consumables, the AA004 screw pack (20 BT2.6x8), and the MagSafe magnetic ring with built-in stickers.

3MF文件已经尽可能地减少了支撑，降低了打印、装配难度，提升了打印成功率和表面质量。安装时请根据说明书步骤安装，如果发现螺丝阻力较大请相信大力出奇迹（我把孔径设置的很小以保证不易滑丝），如果螺丝捅不破牺牲层请先用螺丝刀捅破再装配。

3MF files have minimized support, reduced printing and assembly difficulties, and improved printing success rates and surface quality as much as possible. When installing, please follow the steps in the manual. If you find that the screw resistance is high, please believe that a strong force will produce a miracle (I set the aperture very small to ensure that it is not easy to slip the thread). If the screw cannot break the sacrificial layer, please use a screwdriver to break it first before assembly.

如果各位有任何模型改动之类的建议可以在评论区联系我，也可以关注我的B站账号@林嘉驹，感谢各位的支持，祝您打印愉快。

If you have any suggestions for model modifications, please feel free to contact me in the comments section. Thank you for your support and I wish you a pleasant printing experience.