Highland Cow #2

This is number 2 of a set of 4 Highland Cow Hueforges that I am doing for a friend.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x112.27mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #9 (0.8mm) swap to Orange
At layer #12 (1.04mm) swap to White for the rest.