Pacman Arcade phone and pencil holder

Here is another attempt at one of the contests.

I have designed a phone and pencil holder that resembles a Pacman arcade machine.

I have provided a fully assembled model to reference assembly.

1. Glue the sides of the middle body section and place the side panels onto it. The side panels have cut-outs for ease of alignment.
2. Place glue in the placard cut-out on the body section and press the placard in place.

Materials used: super glue

Layer Height: .16mm stock settings for plates 1-4, 0.2mm Stock settings for plate 4

Infill: 15% infill

Material: I Used Overture PLA Black, Digital Blue, red and Polymaker yellow.

Supports: On build plate 4

Brim Type: none