Super Swoop Bike- Star Wars KOTOR

Here's the Swoop Bike from Star Wars Knights of the Old republic! This is the one you get on Taris, and race with for the rest of the game on the other planets! It scales perfectly! The 3mf file has a perfect printable size, and the STL's are the smallest you can go, so don't go smaller than those.

Assembly Notes:

• You will need some glue for the handles, just a drop to connect them, and you're good to go
• Follow the assemble process below for the easiest connection to avoid breakage

Assembly Guide:

Step 1: Connect the engine pipes into the back engine section. slide the longer tube into the back first, then connect the shorter one.

Step 2: Connect the engine and the back engine, then put the connector pin into the front of the engines

Step 3: Connect the flaps and the front flaps

Step 4: push the wing connector pins into the body, and attach the wings

Step 5: Connect the body and tail with the connector pin

Step 6: Connect and glue on the handles- there are small indentions where they are supposed to go

Step 7: Assemble the engine and flaps onto the wings- they should slide perfectly into the engine side holes

Step 8: Place the driver in the seat and you're good to go Swoop Racing!