July 11, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #16 (1.36mm) swap to Jade White
At layer #18 (1.52mm) swap to Black
At layer #23 (1.92mm) swap to Red for the rest.
License:
BY
benskigomez
