Deadpool/Wolverine

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Bambu Labs Basic Cyan Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Inland Yellow Transmission Distance: 5.4

This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Cyan
At layer #11 (0.96mm) swap to Jade White
At layer #12 (1.04mm) swap to Black
At layer #13 (1.12mm) swap to Dark Red
At layer #15 (1.28mm) swap to Beige
At layer #18 (1.52mm) swap to Yellow
At layer #19 (1.6mm) swap to Jade White
At layer #23 (1.92mm) swap to Black
At layer #24 (2mm) swap to Jade White for the rest.