The Batpod from The Dark Knight

The Batpod from The Dark Knight

As a DC fan, especially a Batman enthusiast. In the Batman series, I like the Batman trilogy directed by Christopher Nolan most.Every appearance of Batman is so handsome, so appropriate. In the meantime, you'll need his gear, his ride. One of the most impressive rides is the batpod with two daunting big tires on the front and back which appeared in the 2008 movie "The Dark Knight." The car was completed by Nolan and designed by Nathan Crowley.

Following the design of the Batmobile and The Batwing,some mates from the makerworld community suggested that I create this Batpod.So I designed this shape batpod from images and clips online with lots of simplified innovation to print and assemble easier.

Recommended printing settings:

First layer height:0.15mm

Layerheight:.0.12mm

Wall loops:3

infill density:100%(the bed1) 30%( only the tires in bed2 )

Note:Matte black PLA is selected for Fuel tank and tires to get the better details（the bed2）, and PETG is recommended for main structure（the bed 1）For better strength.Note the type of support my 3MF file provides.

For the installation procedure, refer to the following assembly guide

Thank you for downloading！