Spinning Spur Croc Charm

Add a unique and dynamic element to your Crocs with this Spinning Spur Charm. Designed to clip securely onto the back strap of your Crocs, this charm features a rotating spur that adds flair to your footwear. The charm is printed in three parts for easy assembly and does not require glue unless the connector breaks. With no supports needed and optimized for minimal filament waste, this charm is both stylish and practical.

 

Print Profile Description and Instructions

 

Printer and Material Used:

 

• Printer: Bambu Labs P1S

• Material: PLA

 

Print Settings:

 

• Layer Height: 0.2mm for good detail and strength

• Infill: 15% for a balance of strength and material efficiency

• Supports: Not needed

• Adhesion: Use a brim if necessary to ensure good bed adhesion

 

Printing Instructions:

 

1. Prepare the Model:

• The charm prints in three parts: the clip in two parts, and the spur.

2. Print Profiles:

• Single Spur Print Profile:

• Arrange the three parts on the print bed to minimize space and time.

• Use the “Print by Object” feature to print each part individually for reduced filament waste.

• Double Spur Print Profile:

• Arrange the six parts (two sets of three) on the print bed.

• Use the “Print by Object” feature to print each set individually.

3. Assembly:

• Once printed, place the spur on one of the sides of the clip and snap the other side on top. It may take some force to snap together, thats to insure a good snap once clipped together

• Test the spinning mechanism to ensure smooth rotation.

• Attach the clip to the back strap of your Croc.

• If the connector breaks, use a small amount of glue to repair and reassemble.

 

Note: Ensure your printer’s bed is level and clean before starting the print to achieve the best results.

Boost MeHey there! If you love my 3D designs and want to see more innovative creations like the Spinning Spur Croc Charm, consider giving me a boost! Your support helps me continue to design and share unique models with the community. Click the button below to support me and keep the creativity flowing. Thank you for your generosity and enthusiasm!