Ecoflow PowerStream Fan Case Cooling Kit 600/800W

Ecoflow Powerstream cooling kit suitable for the 600 and 800 watt variants. The kit is recommended because otherwise the inverter throttles. As a cooler I recommend 180 mm from Amazon USB plug, which even comes with temperature control.

Please print the kit in PETG or ASA as the power stream can get hot and PLA could warp. The screws are pre-adjusted for large and small mm diameters and slightly offset

Update : You can of course adjust the Z height of the model depending on the fan height, best in the slicer, that's the easiest. The best Z height is then fan Z + 3 mm