Metall C-15 (Mega Man Series)

2-Boots, to give the boots a cool touch, print the first 3 layers in black.

• Layer height: 0.2mm
• Perimeters: 3
• Infill density: 15%
• Fill pattern: Cross Hatch

3-Cannon, For the cannon print yellow up to the first slot then change color to red.

• Layer height: 0.2mm
• Perimeters: 3
• Infill density: 15%
• Fill pattern: Cross Hatch

4-Ears, the ears require material support. Make it as shown in the image and print it in this position to get the most detail out of the pieces.

• Layer height: 0.16mm
• Perimeters: 3
• Infill density: 15%
• Fill pattern: Cross Hatch

7-Helmet, the hull does not need material support but good bridges.

• Layer height: 0.2mm
• Perimeters: 3
• Infill density: 15%
• Fill pattern: Cross Hatch