July 22, 2024
Description
任何原装耗材盒都可以兼容的防潮方案
Moisture-proofing solution compatible with any original consumable cartridge
更新日志：
V2 2024-07-21：更新了除了底座外的组件。给横杆增加了扩展套筒，可以限制耗材的位移，旧版横杆也适用，建议打印。给固定轴承的组件与底座之间增加了限位设计。
Updated log:
V2 2024-07-21: Updated components except the base. Added extended sleeves to the crossbar to limit displacement of supplies, older versions of the crossbar also apply and are recommended for printing. Added limit design to the component that holds the bearing to the base.
最近折腾过diy防潮箱，折腾过4L米桶防潮箱，感觉成本又高，打印时间又长。那有什么简单的防潮方案呢？
经常买天瑞的材料，通常来说天瑞会附送一个防潮袋。然后我就萌发了使用天瑞给的材料直接组合成防潮的，主打的就是环保。
Recently, I have tossed a diy moisture barrier, tossed a 4L rice bucket moisture barrier, and I feel that the cost is high again and the printing time is long. So what is a simple moisture program?
Often buy Tianrui materials, usually, Tianrui will come with a moisture-proof bag. Then I sprouted the use of Tianrui to give the material directly combined into a moisture-proof, the main focus is on environmental protection.
首先要准备：一个原装耗材盒，原装的耗材防潮剂，原装的防潮袋，另买2个608zz轴承。
无需开启支撑。如果横杆插不进608zz的内圈，请自行调整，或者用砂纸磨一磨（通常是没问题的，刚刚好）。
铁氟龙管从外面穿进袋子，然后进入到纸箱内部即可完成组装。
First of all, you have to prepare: an original consumable box, original consumable moisture-proofing agent, original moisture-proofing bag, and buy another 2 608zz bearings.
No need to open the support. If the crossbar doesn't fit into the inner ring of the 608zz, please adjust it yourself, or grind it with sandpaper (usually it's no problem, just right).
Teflon tubing is assembled by threading it through the bag from the outside and into the inside of the carton.
如果不是天瑞的耗材，依然可以使用本方案。只要耗材与盒子之间是有一定距离的都可以使用本方案。本支架对距离做得很极限，在狭小的盒子里也只占用很少的高度就可以把耗材托起并且丝滑的出料。如果耗材的宽度之间有差异，可以手动对套筒的高度自行调整，则可以适应绝大多数的耗材。如果盒子本身没有孔洞进出铁氟龙管可以自行用剪刀或者美工刀戳个洞就可以了。
If it is not a Tianrui consumable, you can still use this program. As long as there is a certain distance between the consumables and the box, you can use this program. The holder is very extreme on the distance, and it takes up very little height in the narrow box to lift the consumables and discharge them in a smooth way. If there is a difference in the width of the consumables, the height of the sleeve can be manually adjusted to fit most consumables. If there are no holes in the box for Teflon tubing, you can poke holes in the box yourself with scissors or a craftsman's knife.
固定铁氟龙管的工具推荐使用这位分享的模型，卡铁氟龙管卡得很紧。
The tool for securing the Teflon tubing is recommended to use the model shared by this one, which snaps the Teflon tubing very tightly.
https://makerworld.com.cn/zh/models/191008#profileId-115673
轴承型号尺寸：608ZZ-8*22*7
Bearing model size: 608ZZ-8*22*7
本项目最初发行在中国站
This project was originally released on China Station
https://makerworld.com.cn/zh/models/364079#profileId-271634
License:
Standard Digital File License
ccczj
