Steam locomotive Sir Nigel Gresley - Hueforge

This is 4 color Hueforge of steam locomotive Sir Nigel Gresley.

 

I uploaded two sizes 200x150 X1/P1/A1 and size 180x135 for A1 Mini.

 

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

 

Boost MeI print all of my creations myself.
If you like my work, pls send me a boost, it will help me make more.
Thank you.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

 

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Sunlu Matte White Transmission Distance: 5
PLA JamgHe Blue Transmission Distance: 3
This print uses 4 unique filaments

 

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #17 (1.44mm) swap to White
At layer #24 (2mm) swap to Black
At layer #25 (2.08mm) swap to Blue
At layer #30 (2.48mm) swap to White for the rest.