Print-in-place box // multiple size // square

Fully screwless print-in-place box

/ various sizes, with logo and label placement option /

This collection contains the following models:

• 90x90x30 inner cavity box ( 100x100x40 outer dimension ) in three variation:
  • Plain top
  • Top with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )
  • Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )
• 90x90x50 inner cavity box ( 100x100x60 outer dimension ) in three variation:
  • Plain top
  • Top with LOGO seat ( can accomodate insert with the following dimensions: 20x20x1,6-1,8mm with 3mm radius )
  • Top with smaller LOGO ( can accomodate insert with the following dimensions: 15x15x1,6-1,8mm with 3mm radius ), and LABEL seating ( can accomodate insert with the following dimensions: 40x10x1,6-1,8mm with 3mm radius )
• For every size there is an insert that fits the bottom half of the box. Combine it with your parts ( as negative parts ) to create custom holders.

For other dimensions, please check out my other collection:

https://makerworld.com/en/models/555631#profileId-474421

If you are printing the models on non-Bambulab printers please bare in mind the following:

• Use support of the lower part of the lock, and if you want to print one of the boxes with logos, use support on the logo seatings as well
• Prevent using any support on the hinges and on the hinge of the lock.
• Increase infill at the hinge section and its close proximity.
• Due to some exporting errors, the step files contain a small fragment body at the lower part of the hinge that needs to be manually deleted before printing. ( sorry about that:) )